Cleantech & EV'sNews

Tesla unveils 7.4 MW Powercore to take on ex-exec Baglino’s Heron Link

Tesla has unveiled Powercore, a solid-state medium-voltage transformer that also handles the inverter and breaker functions in a single unit. Tesla rates it at 7.4 MW (9 MVA) continuously at 34.5 kV, with grid-forming support up to 10 MVA of peak power.

It’s made in America and scheduled to start operating in 2027. That’s the same year Heron Power, the startup founded by Tesla’s former top engineer Drew Baglino, plans to start volume production of its own solid-state transformer, the Heron Link.

Update: Tesla has since released a full spec sheet for Powercore, including efficiency, warranty, and its data center plans. We’ve updated the article with the new details.

Tesla’s transformer plan finally gets a name

Tesla first said it would build its own transformers in September 2025, when it unveiled Megapack 3 and Megablock. Megablock connects four Megapack 3 units to a transformer and switchgear, but Tesla shared next to nothing about the transformer itself.

Powercore is that missing piece. Tesla announced it today through its Tesla Megapack account on X:

About an hour later, Tesla followed up with a much longer post on X laying out the full spec sheet:

  • Power: up to 9 MVA (7.4 MW) continuously at 34.5 kV AC
  • Peak power: 10 MVA for grid-forming
  • AC range: 10 kV to 34.5 kV
  • DC range: 800 V to 2,000 V
  • Peak efficiency: 98.86%
  • Availability: system guarantees of 99.9% and up
  • Warranty: up to 25 years
  • Operating range: -40°C to 55°C

It also packs a built-in solid-state medium-voltage breaker that Tesla says clears faults up to 1,000x faster than a conventional breaker. There’s no flammable oil, and it’s modular, so components can be serviced in the field without swapping the whole unit.

Tesla is pitching one product for three markets: battery storage, utility-scale solar, and 800 Vdc data centers. For Megablock, Powercore replaces the current two-step setup, where Megapack’s inverters output 480 V AC before a separate transformer steps it up to medium voltage. Tesla says that old architecture had twice the losses. For solar, Powercore works as a central inverter for today’s 1,500 Vdc arrays and upcoming 2,000 Vdc systems.

Tesla still hasn’t shared pricing, customers, or a factory location. It only says Powercore will be made in the US “of U.S. and imported parts” with first units operating in 2027.

The idea behind a solid-state transformer is simple enough. A typical solar or battery project uses low-voltage inverters to convert DC into AC, then a big oil-filled, iron-core transformer to step that up to grid voltage. A solid-state unit does both jobs with silicon carbide power electronics, which means less gear, a smaller footprint, and active control over voltage and frequency. That control is what “grid-forming” means: the unit can help hold the grid steady instead of just following it.

And with lead times on conventional transformers stretching into years as data centers and renewable projects pile into interconnection queues, there’s real demand for an alternative.

Heron had a head start

You can’t look at Powercore without thinking of Heron Power.

Baglino spent 18 years at Tesla and finished as SVP of powertrain and energy, in charge of batteries, motors, power electronics, and energy products. He left in April 2024 and launched Heron Power in 2025 to build solid-state transformers.

He brought a lot of Tesla’s power electronics talent with him. As we reported when Tesla first announced its transformer plans, Heron hired engineers who led power electronics design for Powerwall 3, the next-gen Megapack, and Superchargers, along with the person who ran Tesla’s power electronics controls team for charging and energy products.

Since then, Heron has raised a $38 million Series A, a $140 million Series B led by Andreessen Horowitz and Breakthrough Energy Ventures, and a $60 million credit facility from J.P. Morgan and TriplePoint Capital. Former Tesla CFO Zach Kirkhorn sits on its board, and Tesla co-founder JB Straubel is an investor.

It’s also building Heron Factory One, a 286,000-square-foot plant in Morgan Hill, California, designed to make 10,000 Heron Links a year. That’s over 40 GW of annual capacity, with commercial production planned for late 2027.

And the customers are lining up. Vantage reserved more than 1 GW for its data centers, Intersect reserved 1.5 GW, LG Energy Solution Vertech is integrating Heron Link with its US-made battery systems, and RWE signed a pilot to install Heron Links at a Texas battery storage site in April 2027. Baglino says Heron has 50 GW of orders in the pipeline.

Here’s how the two compare based on what each company has disclosed:

Tesla Powercore Heron Link
Functions MV transformer, inverter, breaker Replaces LV inverter and MV transformer
Continuous rating 7.4 MW / 9 MVA ~5 MW (solar/storage), ~4.2 MW (data center)
Peak 10 MVA (grid-forming) Not disclosed
AC voltage 10 kV to 34.5 kV Up to 34.5 kV
DC voltage 800 V to 2,000 V 700 to 1500 V
Grid-forming Yes Yes
Efficiency 98.86% peak 98.6% DC-to-MV; over 98.5% MV-to-800 VDC
Availability 99.9%+ system guarantee; up to 99.7% per unit (data centers) 99.5% lifetime availability
Warranty Up to 25 years Not disclosed
Data centers MV straight to 800 Vdc, working with Nvidia 34.5 kV AC to 800 VDC with integrated storage
Manufacturing US, factory not disclosed Morgan Hill, CA, 40 GW/year planned
Timeline First units operating 2027 Pilot April 2027, volume late 2027
Announced customers None Vantage, Intersect, RWE, LG ES Vertech

On paper, Powercore is the bigger box, and now it has the better numbers too. At 7.4 MW continuous, it carries about 50% more power per unit than the 5 MW Heron Link, and its 98.86% peak efficiency edges out Heron’s 98.6%. But Tesla’s figure is a peak number, and Heron doesn’t label its own as one, so it’s not quite apples to apples. Neither company has shared pricing.

Tesla is also going straight at Heron’s data center pitch. Powercore converts medium voltage directly to 800 Vdc, the rack architecture Nvidia is pushing, and Tesla says it’s working with Nvidia on 800 Vdc designs. Heron’s data center version does the same 34.5 kV AC to 800 VDC conversion with built-in storage, and data centers make up about a third of its business. Tesla’s answer to the storage piece is Megapack on the DC bus, and it says it already has 10 GWh of Megapack running at data centers.


Author: Fred Lambert
Source: Electrek
Reviewed By: Editorial Team

Related posts
NewsPhotography

These 7 black-and-white images just won major awards – and they're a masterclass in monochrome photography

NewsPhotography

When Jaguar asked Annie Leibovitz to photograph Florence Pugh with their new car, she dodged the standard playbook and went in a very different direction

NewsPhotography

“Photographers can be easily replaced,” warned Marilyn Monroe as she directed a young Lawrence Schiller months before she died – now you can see the photos

Cleantech & EV'sNews

Volkswagen is cooking up a 'spicy' new electric hot hatch

Leave a Reply

Your email address will not be published. Required fields are marked *