How to use your Android or iOS device as a webcam

A good webcam, let alone any webcam, is tough to find these days. Just to put a time marker on this post: the coronavirus pandemic has moved much of America’s workforce into a work-from-home environment. With so many people in need of basic tech supplies, demand for webcams has surged, and as supplies dwindle, prices have unsurprisingly skyrocketed.

My colleague Chris Welch has reported on the trend, and many of us here at The Verge have spent more time (and money) than we’d have liked just to equip our home Windows 10 or macOS computers with a decent camera. Thankfully, you don’t have to fight the online crowd to spend hundreds on a webcam that you may or may not get much use out of when we’re on the other side of this pandemic. There is an alternative: a spare (or your current) Android or iOS phone or tablet you might have.

We’ll start with how to get your Android phone or tablet to act as a webcam for your computer, and then we’ll move into doing the same with your iPhone or iPad. (By the way, you can also easily turn a Wyze security camera into a webcam, but you’ll likely get far better video quality from your device.)

Photo by Amelia Holowaty Krales / The Verge

How to use your Android phone / tablet as a webcam

There are several apps in the Google Play Store that claim to morph your Android device into a webcam. Out of the few that I tried, DroidCam offered the easiest setup with the most reliable results. I don’t doubt that there are more clever, app-free solutions to get this done, but for the sake of simplicity, this is what we’re going with here.

• Download and install the free version of DroidCam from the Play Store. (It requires a device running Android 5.0 Lollipop or newer software.) The developer, Dev47Apps, makes a desktop client for Windows 10 and Linux (but unfortunately, not for macOS) that you’ll also need to download onto your computer. (Note: I’m focusing on steps to use it with Windows 10 in this how-to.) Make sure that you download version 6.2 since it addresses some issues that might cause a headache if you use an earlier version.

• After the Android app is installed, focus on getting the desktop app up and running. During installation, you’ll need to allow the app to install audio drivers. Feel free to uncheck “Always trust software from DEV47 APPS” if you prefer.

• Once the Windows app is running, you’ll see options near the top of the app window that will let you connect your device wirelessly or via USB. It’s actually easier to connect via Wi-Fi so that’s what we’re going to focus on. Thankfully, it’s on that setting by default.
• Below those options, you’ll see a box where you need to input your Android device’s IP address. At this point, open up the DroidCam app on your Android phone or tablet. It will then show your device’s IP address. Go back to your PC and input that address in the field called “Device IP.”

• There are two things to do before you hit “Start” in the desktop app. First, be sure both boxes for “video” and “audio” are checked. If only video is checked, your phone’s microphone won’t pick up your voice.
• Next, click the three vertical dots in the top-right corner of the Android app to open the settings. There, in the “camera” section, you can choose whether to use the front-facing or back-facing camera. Your back-facing camera is almost guaranteed to be more capable than your selfie cam, so I recommend using that. Most of the other default settings are set to the ideal choice, so you can leave them.

• Finally, hit “start” in the desktop app to initiate the connection. You should see a preview of the video feed on your PC screen. If you don’t see it, ensure that both your PC and Android device are on the same Wi-Fi network or LAN. My PC is wired to the internet, but it still works wirelessly with my phone because they’re on the same network.
• Now, simply open up your preferred videoconferencing app, like Zoom, Google Meet, or Skype. In the video settings within each app, switch the default camera to “DroidCam Source 2” or “DroidCam Source 3.” One of those should mirror what you see in the DroidCam Client window.

• To make your device’s microphone the default input in your videoconferencing app, go to the microphone section in your videoconferencing app (it may be referred to as audio input), and select “DroidCam Virtual Audio.” Once you do that, it should work as intended.
• A quick aside: if you’re using the front-facing camera for video duties, and for some reason need to grab your phone-turned-webcam to send a text or browse through your contacts, DroidCam won’t stop you. You can collapse the app without interrupting the camera feed.
• Now, if you’re using a phone, you’ll want to figure out a way to position it at your desk to get a webcam-like angle of your face. For some, this could be the most difficult step. Though, a simple solution for me came in the form of a car dashboard mount that I already had. I own this model from iOttie in my car, and it easily affixed to my glass monitor stand. Its grip spread wide enough to fit a Nexus 6P in a hard case, so practically any phone should fit. The company also makes a model with a suction cup, which should work with most desks.

You may also notice several additional DroidCam X Pro controls in the screenshot below; you’ll need to pay $4.99 to access those. You can do that if you wish to support the developer, but you may be happy with the free version, which doesn’t display watermarks or make you jump through too many hoops.

Photo by James Bareham / The Verge

How to use your iPhone / iPad as a webcam

Just like Android, there are several iOS apps that claim to be able to turn your mobile device into a webcam. Not to discount the many options out there, but I found EpocCam (requires iOS 10.3 or newer software) to be the simplest one to use, and you don’t need to use any cables to get it working. It even works with Android, if DroidCam wasn’t working to your liking.

• Download and install EpocCam from the App Store
• Unlike DroidCam above, a set of desktop drivers for EpocCam is available for both Windows 10 and macOS. You can head to the developer’s site, Kinoni.com, to download them on your machine.
• After you’ve installed the desktop drivers, there’s technically no app that you need to concern yourself with opening up. Just make sure that your iOS device and computer are on the same Wi-Fi or LAN. Open the mobile app, and finally, launch your videoconferencing app.

• Every video meeting app that I tried worked seamlessly with my iOS device. Just look for “EpocCam” in the camera settings. Once you select it, you should see a notification appear on your computer confirming that the camera is connected via Wi-Fi. In my case, it said “EpocCam iOS connected using Wi-Fi.”

• There are a few troubleshooting steps to take if things aren’t working perfectly from the start. If you’re using a browser-based videoconferencing app rather than a separate computer app, make sure that you give the browser permission to access your webcam. A notification should appear asking you for permission prior to launching the app or conference call. Look for that near the web address bar.
• Also, in the case of the ever-popular Zoom application, the latest update (4.6.11 at the time this was written) breaks compatibility with EpocCam. Per the top-rated comment on Kinoni’s YouTube video on how to use your iPhone as a webcam on macOS, you’ll need a slightly older version (4.6.7) of the Zoom app for it to recognize your mobile device’s camera as a viable webcam. You can download that version on the site uptodown.com, and this version worked for me, but be aware that you’re using the software at your own risk. There may be vulnerabilities that you expose yourself to both by using older software and downloading it through an unofficial source.

There are a few more things to note about the free version of EpocCam. First, its free feature set is much more restrictive than DroidCam’s. For instance, in order to be able to use the front-facing camera on your iOS device, you’ll need to review the app on the App Store. Additionally, the free version shows a watermark on your video feed and throttles the resolution at 640 x 480 and 30 frames per second.

What’s more, the free version doesn’t even let you use your device’s microphone, so you’ll need to plug a set of headphones into your computer that features an in-line microphone, unless you’ve figured out another solution. The EpocCam Pro app does away with all of these limitations and adds more functionality for $7.99 on the App Store if you’re installing on an iOS device or $5.49 on the Play Store if you want to follow the steps above on an Android phone.

Vox Media has affiliate partnerships. These do not influence editorial content, though Vox Media may earn commissions for products purchased via affiliate links. For more information, see our ethics policy.