BenQ PD2770U review: A self-calibrating monitor for pros

Most monitors sold today are chasing the same trends. OLED panels are common, bringing with them excellent contrast, and refresh rates have surged into the hundreds. These upgrades have led to excellent displays, but the BenQ PD2770U marches to a different tune. It is focused on professional content creation and has several unusual features—such as a built-in display calibration tool—that will appeal to the monitor’s audience.

Read on to learn more, then see our roundup of the best monitors for comparison.

The basics of the BenQ PD2770U’s display panel are nothing to write home about. It has a 27-inch 4K IPS-LCD panel with a refresh rate of 60Hz. The backlight is edge-lit LED, so no fancy Mini-LED backlighting here. Adaptive sync isn’t present, either.

However, the BenQ PD2770U includes several uncommon features. It has built-in image calibration hardware tucked into the top bezel, plus ambient light sensors and a USB-C / Thunderbolt hub that includes Ethernet connectivity. It also ships with a display hood and wireless remote for controlling the monitor’s features.

These features don’t come cheap, though, as the PD2770U carries a high MSRP of $1,699.99. Speciality monitors meant for professionals tend to carry a hefty price premium.

The BenQ PD2770U is a monitor meant for professional settings, so it offers a reserved and low-key look. That’s not to say it’s unattractive, though. I rather like the charcoal-and-gray colorway, which remains a professional tone and is distinct from the matte black look typical of less expensive professional monitors, as well as the metallic silver used by most similarly priced competitors.

Build quality is high. As with most displays, plastic is the material of choice, but the stand base is metal and the plastics that make up the body of the display are robust. It’s a hefty monitor, as well, at nearly 20 pounds with stand. That’s heavier than many 32-inch monitors.

A monitor hood is provided with the monitor. The hood is used to shade the display and reduce the impact of ambient light on its surface. It attaches magnetically, too, so it’s not too difficult to install or remove. Most home users are unlikely to use the hood, but it’s handy if you work in a space where you can’t control ambient light as much as you’d like.

The included stand has a flat, sturdy base that minimizes its footprint on your desk. Ergonomic adjustment includes up to 115mm of height, 25 degrees of tilt, 30 degrees of swivel, and up to 90 degrees of pivot (for use in portrait orientation). None of these adjustments are remarkable for a premium monitor, but they’re competitive. A 100x100mm VESA mount is also available for use with a third-party monitor stand, arm, or wall mount.

Connectivity is a headline feature for the BenQ PD2770U. The company seems to expect that the monitor will be used with a high-end laptop, like a MacBook Pro or Asus ProArt, and so it provides a Thunderbolt 4 / USB-C port with up to 96 watts of Power Delivery and DisplayPort video. That makes for easy single-cable connections to any laptop that has USB-C with the same features (which includes most modern laptops).

The monitor also provides a second USB-C upstream port, though it supports just 5Gbps of data. It’s useful if you want to connect a desktop alongside a laptop.

Both USB-C ports expand a connected device’s connectivity to a pair of wired USB-A ports, each with 5Gbps data rates, and a single RJ45 Ethernet port. This isn’t the most connectivity you’ll find from a monitor—the Dell U3225QE, for instance, offers over twice as much USB connectivity—but it’s still a respectable range, and the inclusion of an Ethernet port is always good to see.

As you might expect, the PD2770U provides KVM switch functionality. That means you can connect two computers to the USB-C upstream ports, then connect wired devices to the USB-A downstream ports, and use the monitor to switch which computer is connected to the USB-A devices.

The BenQ PD2770U’s on-screen menu system can be accessed either with a joystick control on the monitor, or a convenient puck-style remote. The puck-style remote is a small, wireless dial that’s great for making quick adjustments. Alternatively, most monitor features can be accessed through BenQ’s attractive DisplayPilot software, which is available for both Windows and MacOS.

A long list of image quality adjustments are available. These include many preset modes that target specific color gamuts, such as AdobeRGB, Rec.709, DCI-P3, DICOM, and more. The monitor also provides precise gamma and color temperature adjustments with additional color customization, if desired.

Ambient light sensors are included and can be used to automatically adjust brightness throughout the day. This can reduce eye strain and will help the monitor appear accurate in a wide range of lighting conditions.

The jewel in the PD2770U’s crown, however, is the automatic hardware calibration tool permanently tucked inside the thick top bezel. It can deploy automatically on a set schedule and runs a hardware-defined display calibration process (meaning no additional software is required to use it). Aside from convenience, this feature adds value, as color calibration tools typically sell for $150 to $300 or more, depending on the model.

On top of that, the BenQ provides a remote calibration management tool called DMS Local, which can be used to sync color profiles across a fleet of monitors and enforce mandatory calibration. Of course, I can’t comment on the specifics of how well DMS Local works in a professional studio, but I thought it worth a mention.

Overall, I like the built-in calibration. Calibration normally requires additional hardware, which you must connect and put into place before calibration can take place. That extra hassle can make it easy to justify putting it off until tomorrow—for weeks on end. BenQ’s built-in calibration gives you less reason to put it off.

Calibration does require roughly 10 minutes, though, so you’ll have to take a break (or use a second display). You also need to warm up the display for 30 minutes before it can be calibrated, though the hardware takes this into account and will automatically engage after the warm-up period has ended.

The BenQ PD2770U doesn’t include built-in speakers and instead provides only a 3.5mm audio pass-through for connecting a headset or speakers. It is a bit disappointing to see speakers are excluded, though it’s not uncommon for high-end monitors to lack speakers.

The BenQ PD2770U is a monitor tightly focused on creative work including photography, videography, and digital art. That might lead you to expect excellent image quality across the board, but the PD2770U instead makes some trade-offs to provide a presentation focused on accuracy and realism.

First up is brightness, where the BenQ PD2770U achieved an acceptable maximum SDR brightness of 351 nits. As the graph shows, it’s definitely not the brightest image available, but also not dim. This level of brightness is sufficient to cover SDR workflows, as well, which typically see brightness calibrated to somewhere in the 100 to 200 nits range.

Though not the brightest monitor around, the BenQ PD2770U benefits from an effective Nano Matte finish and the included display hood. These features together make glare a non-issue in most situations, even in rooms with unusually bright and uneven lighting. You’ll only see glare if a bright light source is directly over your shoulder.

Contrast is a weakness of the BenQ PD2770U. Though it aims to provide great image quality, it’s also a IPS-LCD display, and doesn’t have a dynamic Mini-LED backlight. The result is a contrast ratio that’s behind even most LCD monitors.

It should be noted, though, that enhanced contrast isn’t the objective of the display. Rather, the Nano Matte display is meant to diffuse light in a way that provides good color accuracy and a comfortable viewing experience. I like it, though I should mention I am generally biased towards matte over glossy panels.

Those who want more contrast should consider the Asus ProArt PA32UCDM, a beautiful professional monitor with an OLED panel.

Color performance is something the BenQ PD2770U needs to nail and, fortunately for BenQ, it scores extremely well. The BenQ PD2770U achieved a maximum color gamut that spanned 100 percent of sRGB, 98 percent of DCI-P3, and 99 percent of AdobeRGB. That’s among the best result we’ve ever recorded.

There is one detail to note, though, which is that the monitor can’t display this range of all gamuts simultaneously. For example, when the monitor is set to AdobeRGB the DCI-P3 color gamut drops to about 87 percent (and vice versa). This isn’t of much practical concern because I have a hard time fathoming a situation where you would need to work in both color spaces at once on the same display, but I thought I’d mention it.

BenQ also provides modes for color gamut standards I don’t normally test, like DICOM and Rec.709. The range of supported color gamuts is wider than what you’ll find on a typical gaming or general-use monitor—even those sold above $1,000.

The BenQ PD2770U delivered a solid color accuracy result that dipped below an average color error value of one. While not the very best I’ve tested, any result around one (or below) is excellent, and means the image will generally look accurate and true to the content being displayed.

Color temperature and gamma are also important aspects of accuracy, and here the BenQ PD2770U scored extremely well. It presented a tight gamma curve of 2.2 and a color temperature value of 6500K. Both are the values we expect to see at default settings, and the values most monitors target out of the box. These numbers mean the image looks neither too dark or too bright, nor too warm or too cool. The monitor provides a wide range of gamma and color temperature settings, so you can tune these figures to your needs or preference.

Sharpness is excellent, as the 27-inch monitor packs a resolution of 3840×2160. That works out to about 163 pixels per inch, which is as high as you’ll find without upgrading to something more exotic, such as a 5K or 6K monitor. 4K images and videos reveal a ton of fine detail, and small text remains easy to read.

On the whole, the BenQ PD2770U’s SDR image quality is great with the exception of contrast, which is modest at best—and this rather bluntly defines the PD2770U’s appeal. This is not a monitor for enjoying entertainment or playing games, but rather a monitor for professional work. As such, the accuracy of the image, and the ability to calibrate it, becomes more important than the wow-factor a better contrast ratio would provide.

Of course, the dream would be to have a monitor with both a high-contrast OLED panel and the high degree of accuracy and calibration that the BenQ PD2770U provides. Monitors like that do exist, but they’re often at least twice the PD2770U’s price (and yet may still lack useful features found on the PD2770U, such as automatic hardware calibration).

The BenQ PD2770U supports HDR10 / HLG, but HDR is not the focus of the monitor, and it lacks any version of VESA DisplayHDR certification. You should consider HDR to be something the PD2770U can provide in a pinch, but not something that will be accurate. This is largely due to the lack of brightness and contrast, both of which are required to do HDR justice.

Motion clarity also takes a back seat, as the PD2770U only provides a 60Hz refresh rate and does not support adaptive sync. While slower-paced games look fine on the PD2770U, it’s definitely not a good choice for highly competitive games.

The BenQ PD2770U is a professional content creation monitor aimed at creatives who primarily produce SDR content and need excellent, accurate color performance. It goes the extra mile with an automatic color calibration tool that can operate on a schedule and requires no additional hardware or software to operate.

While many professional monitors include calibration hardware, it’s unusual for that hardware to be built physically into the monitor itself. It should prove useful if you mean to calibrate your monitor but often find it a hassle, or forget to do it on a regular schedule.

This perk is balanced by the monitor’s barely-there HDR support and missing adaptive sync, which mean the PD2770U is not great for entertainment and gaming. However, the PD2770U is a great choice if you need a color accurate monitor for professional work.